Page 1 of 2

WANTED: Black Followers

PostPosted: Fri Feb 06, 2015 1:49 pm
by BamBam
Looking to buy some of the black .450 followers, drop me a pm if you have any you want to part with. Thanks

Re: WANTED: Black Followers

PostPosted: Fri Feb 06, 2015 3:06 pm
by m113103
pm wildcatter :D

Re: WANTED: Black Followers

PostPosted: Fri Feb 06, 2015 4:56 pm
by BamBam
Already did, but he is a bit busy I was told so I thought I would post here as well.

Re: WANTED: Black Followers

PostPosted: Sat Feb 07, 2015 1:46 am
by Texas Sheepdawg
How many do you "need"?

Re: WANTED: Black Followers

PostPosted: Sat Feb 07, 2015 2:33 am
by BamBam
Texas Sheepdawg wrote:How many do you "need"?



Pretty much whatever I can get at this point. Right now I only have one 5 round factory mag.

I did order 3 SS Stoners to play with but can’t find anything for followers except those blue or yellow snap in units. They may work but I would prefer a bit more original myself.

If someone has one or two they want to part with that’s a start. I’d like to eventually end up with two five rounders for hunting and a few higher capacity mags for tinkering and range time.

I hate having an AR platform with only one 5 rounder. :ugeek:

Re: WANTED: Black Followers

PostPosted: Sat Feb 07, 2015 2:44 am
by Texas Sheepdawg
Check your PMs for more info.

Re: WANTED: Black Followers

PostPosted: Sat Feb 07, 2015 3:12 am
by BamBam
PM reply sent

Re: WANTED: Black Followers

PostPosted: Sat Feb 07, 2015 4:04 am
by Texas Sheepdawg
I use the AR Stoners too. The 20 round and a few 30 round mags. You may have to test and tweek the feed lips and open up that half moon on the front of the magazine so that it will feed properly. Your results may vary but once you get them running, they are fine.

Re: WANTED: Black Followers

PostPosted: Sat Feb 07, 2015 4:06 am
by Texas Sheepdawg
You can find tips and tricks here.
viewtopic.php?f=2&t=13014

Re: WANTED: Black Followers

PostPosted: Sat Feb 07, 2015 6:05 am
by BamBam
Thanks. I have read through that a few times, now I just need to get my mags in hand and start tinkering. Midway had a sale on them.