What stock are you using on your 450?

[lungingturtle2]

I have an Ace stock on my .450 with a limbsaver medium size slip-on pad I bought at walmart for $20.00. Fits and works great!

[longrangedog1000yd]

i have a ace full length,and it stops all recoil as long as you aint shooting it! but honestly i have not found the recoil objectionable,mybe when i get to the 300gr bullets it may pick up though, i was running 101.0 grs of hodgdon 50bmg with 200 gr sierrea mk's in my 300rum and it vibrated your jaw a little.

[Hic28]

I have a Magpul UBR with the thickest recoil pad, heavy buffer and extra power spring and have zero issues.

[Blasternank]

First, Hoot-is your limbsaver a slip on or a fit one? If so, which one fits that model of stock?
...snip...
Thanks for your input.

This is from the thread when I first discovered them back on April 22, 2010:
-----------------------------------------------------------------------------------------
...snip... I'm thinking that you haven't seen what I just bought from Walmart. It sure looks like the real deal. Feels like it too. The medium is a great fit on my A2 stock and for only $19.95. You be the judge...

Here's what I bought


Here's what it looks like


From the back of the package


From the Sims web page

---------------------------------------------------------------------------

End of Past Thread Quote.

The medium if a perfect fit. I got my Dad one this past November and they've gone up a few dollars since 2010, but that's still less than you can get a Sims branded package one online at places like Midway. If you're handy and don't like the look of a slip-on pad, even though it blends well with the A1/A2 stock, you can easily adapt the permanent model Limbsaver Model 10401 to fit with minimal dinking around.

Either way you go, if there were only one item I could add to my 450b, be it the brake, the CCWS, the shake-weight system or the slip-on Limbsaver, hands down, I would take the Limbsaver. I do not like waffle tattoos on my shoulder.

With all four items, I can honestly say mine is a real pussycat. Folks at the range are truly shocked when I let them shoot it. A fellow once was shooting a miserable to watch lever action in 450 Marlin. I took one of my rounds down to where he was shooting and asked if he'd like to try a different spin? After shooting my 450b, he proclaimed "That's just not fair!". I declined his offer to reciprocate, having seen how that Marlin wracked his body every shot.

Hoot

Hoot,

Do you have a picture of your rifle and the setup on it?

Thanks.

[Hoot]

Hoot,

Do you have a picture of your rifle and the setup on it?

Thanks.

I'm no commercial photographer by any means and my limbsaver is a little the worse for wear and tear these past 2+ years, but here's what it looks like.



and



It's a closer match to a mil-spec A2 than it is to this aftermarket A1 knockoff. Not as glossy and looks more like it belongs there in the daylight.

Hoot

[wildcatter]

All of them, it depends on the mission..

..t

[Texas Sheepdawg]

John Noonan A1 Recoil-Less Stock with limbsaver pad.
http://www.arrecoilless.net/

[Hoot]

John Noonan A1 Recoil-Less Stock with limbsaver pad.
http://www.arrecoilless.net/
http://i105.photobucket.com/albums/m229/Bigbadsheepdawg/0a25ef04.jpg

That looks like an A1 stock?

Hoot

[Texas Sheepdawg]

John Noonan A1 Recoil-Less Stock with limbsaver pad.
http://www.arrecoilless.net/
http://i105.photobucket.com/albums/m229/Bigbadsheepdawg/0a25ef04.jpg

That looks like an A1 stock?

Hoot

Yep. That's the animal.

[Texas Sheepdawg]

The 6.5 Grendel has the Noonan A2 stock with a standard buttplate. (Center)
The 450 Bushmaster has the Noonan A1 stock with the limbsaver buttpad. (Bottom)