Page 1 of 1

Flash Hider

PostPosted: Wed Oct 21, 2015 7:14 am
by Big Tulip
I just had .450 Bushmaster built using a Brownell 16" Stainless barrel. It has a 3/4 x 24 thread on it, I have a thread protector on it now but was wondering if anyone knows if there is a flash hider available, stainless otherwise?
Thanks.

Re: Flash Hider

PostPosted: Thu Oct 22, 2015 2:26 pm
by BayShoreBallistics
I am not aware of a flash hider with that thread, but Ross can make you a muzzle brake that has the proper threads.

Re: Flash Hider

PostPosted: Thu Oct 22, 2015 6:45 pm
by madmathew
I ordered a Ross brake for mine, it was about the only one I could find in that thread.

Re: Flash Hider

PostPosted: Sun Oct 25, 2015 9:21 am
by bullnose
I have the same barrel. I was a bit perplexed by the lack of flash hiders in this thread pitch. You'll have to look for a .458 SOCOM flash hider if you want to find anything in this thread pitch.

I used a Wilson Combat .458 accu-tac flash hider on my Franklin Armory .450 BM barrel with no issues (different thread pitch, but same idea/application).

Here's one - scroll to the bottom of the page.

http://www.sbrammunition.com/458socom_parts.html

Here's another, looks pretty much like the one above:

http://www.dark-storm.com/dsi-phantom-f ... socom.html

For what it's worth, I ended up ordering a Ross Brake. For $35 you can't go wrong.

Re: Flash Hider

PostPosted: Wed Oct 04, 2017 8:03 am
by Nerd Hubby
I spoke with Saturn, the barrel manufacture for the .450 Bushmaster that Brownell's sells. They are making a flash hider for me, and are going to begin selling it as an option.

Re: Flash Hider

PostPosted: Thu Oct 05, 2017 6:11 am
by Texas Sheepdawg
Nerd Hubby wrote:I spoke with Saturn, the barrel manufacture for the .450 Bushmaster that Brownell's sells. They are making a flash hider for me, and are going to begin selling it as an option.

Ross has a page here in the market place. Just email him your specs and $35 shipped. Boom.
And this brake has had some serious R&D done on it and it’s proven effective for any caliber and any thread.

Re: Flash Hider

PostPosted: Thu Oct 05, 2017 6:12 am
by Texas Sheepdawg
Big Tulip wrote:I just had .450 Bushmaster built using a Brownell 16" Stainless barrel. It has a 3/4 x 24 thread on it, I have a thread protector on it now but was wondering if anyone knows if there is a flash hider available, stainless otherwise?
Thanks.



Here’s the place to learn more.
viewtopic.php?f=10&t=539