Magpul M-LOK QD Sling Mount on .450 Bushmaster

Talk about the AR15 style rifles chambered in 450 Bushmaster.

Moderator: MudBug

Magpul M-LOK QD Sling Mount on .450 Bushmaster

Postby tomahawk » Sat Oct 15, 2016 2:14 pm

I have the Magpul M-LOK QD Sling Mount attached to the tube.

I used two #10 SS washers. I filed flats on them so that they would fit inside the slots. This centers the screw in the slot.

I used two 1/4" SS washers. I drilled out the hole so the football shaped part of the nut would fit inside the washer.

I took my pinky finger with the nut and 1/4" washer, slid it up inside the fore end. I then eased the #10 washer inside the slot and lined up with the other washer and nut.

Then I put the QD Sling Mount on top and eased the screw down through everything. I was able to get a needle nose pliers through one of the other slots to keep the nut from rotating.

It seems to work well.

Image

Image

Image

Image
tomahawk
 
Posts: 5
Joined: Sun Oct 02, 2016 12:24 am

Re: Magpul M-LOK QD Sling Mount on .450 Bushmaster

Postby Al in Mi » Sun Oct 16, 2016 5:44 am

very creative I must say!!!!

I prefer my sling mounts off the top also, might have to infringe on your patent :P
User avatar
Al in Mi
 
Posts: 1982
Joined: Sat Jun 20, 2009 8:24 am

Re: Magpul M-LOK QD Sling Mount on .450 Bushmaster

Postby tomahawk » Sun Oct 16, 2016 7:07 am

I posted it so that people could use the info if they wish, or share an even better idea.
tomahawk
 
Posts: 5
Joined: Sun Oct 02, 2016 12:24 am

Re: Magpul M-LOK QD Sling Mount on .450 Bushmaster

Postby Jim in Houston » Mon Oct 17, 2016 11:09 am

Life Member, Texas State Rifle Association; Patron LIfe Member, NRA
User avatar
Jim in Houston
 
Posts: 1072
Joined: Mon Jan 17, 2011 5:55 pm
Location: Houston, TX


Return to AR15 Style Rifles

Who is online

Users browsing this forum: Google [Bot] and 24 guests

cron