450 Bushmaster aftermarket vendors?

Talk about the AR15 style rifles chambered in 450 Bushmaster.

Moderator: MudBug

450 Bushmaster aftermarket vendors?

Postby Gtek » Tue Dec 13, 2016 5:45 pm

I don't know what to think at this point, I really wanted to spend some $ with one of them. I emailed Tromix, no reply in one week. I call an hour before closing, no answer. Wait a week, ok I will look into a Gryphon, emailed twice with questions (registered, name, number) and no reply in a week and with no number to call so what is a fellow to do? Have a 16" Bushy upper, wanted to step out and go 18"/Mid. Have I missed something?
Gtek
 
Posts: 12
Joined: Sat Jan 02, 2016 8:25 pm

Re: 450 Bushmaster aftermarket vendors?

Postby Al in Mi » Wed Dec 14, 2016 5:47 am

Gtek wrote:I don't know what to think at this point, I really wanted to spend some $ with one of them. I emailed Tromix, no reply in one week. I call an hour before closing, no answer. Wait a week, ok I will look into a Gryphon, emailed twice with questions (registered, name, number) and no reply in a week and with no number to call so what is a fellow to do? Have a 16" Bushy upper, wanted to step out and go 18"/Mid. Have I missed something?


not sure, but sounds very uncharacteristic of both, try PM'ing them off the board here.
User avatar
Al in Mi
 
Posts: 1982
Joined: Sat Jun 20, 2009 8:24 am

Re: 450 Bushmaster aftermarket vendors?

Postby Hoot » Wed Dec 14, 2016 5:48 am

Tis the season to be busy....

IMHO, Mid-Length gas system is positively the way to go. One of my favorite things about the Bartz AR. That and the fit & finish is like a hand made pair of boots.

Hoot
In Theory, there is no difference between theory and practice. In Practice, there is.
User avatar
Hoot
 
Posts: 5083
Joined: Tue Feb 09, 2010 9:34 am
Location: Minnesota

Re: 450 Bushmaster aftermarket vendors?

Postby Mdt1992 » Wed Dec 14, 2016 5:55 am

Another to look at it Trident armory. I have their 18 3/4" ported barrel. Have no complaints about it.
Mdt1992
 
Posts: 14
Joined: Mon Mar 24, 2014 3:23 pm

Re: 450 Bushmaster aftermarket vendors?

Postby TonyRumore » Wed Dec 14, 2016 3:44 pm

I reply every to e-mail that comes in, and usually check the e-mail every few hours during the day.
If you didn't receive a reply, then I didn't get your e-mail.

As far as the phone not getting answered....that shouldn't have happened, especially an hour before close. I'm not sure what happened there.

Tony Rumore
Tromix
Last edited by TonyRumore on Wed Dec 14, 2016 8:57 pm, edited 1 time in total.
TonyRumore
 
Posts: 89
Joined: Tue Dec 16, 2014 1:02 pm

Re: 450 Bushmaster aftermarket vendors?

Postby Gtek » Wed Dec 14, 2016 7:15 pm

Mr. Rumore, no malice intended or implied. Just want to build another one of these things and maybe something had changed in the 450 Bushmaster world. Address was copied on web page and pasted, shows sent but who knows. Complete read on your sight informed detailed questions to please submit in email, I will try again. Thank You for the timely response and look forward to the communication.
Gtek
 
Posts: 12
Joined: Sat Jan 02, 2016 8:25 pm

Re: 450 Bushmaster aftermarket vendors?

Postby TonyRumore » Wed Dec 14, 2016 8:54 pm

If it happens again, just call my cell phone. 918-373-0801.

Tony Rumore - Owner
Tromix
TonyRumore
 
Posts: 89
Joined: Tue Dec 16, 2014 1:02 pm

Re: 450 Bushmaster aftermarket vendors?

Postby glock23c » Fri Dec 16, 2016 10:07 pm

^^^^ That's customer service!!
glock23c
 
Posts: 45
Joined: Sat Nov 03, 2012 1:34 am

Re: 450 Bushmaster aftermarket vendors?

Postby BayShoreBallistics » Wed Dec 21, 2016 4:23 pm

My experience when ordering from Tromix was very smooth. Excellent barrels too! The only thing that I would have liked to see would have been Cerakote finish, but that was easy to fix. Proven accurate and reliable.
Liberty and Freedom for All!(Some restrictions apply, must be over 18 and not available in all states)
User avatar
BayShoreBallistics
 
Posts: 101
Joined: Thu Oct 01, 2015 5:33 pm
Location: Northern Michigan


Return to AR15 Style Rifles

Who is online

Users browsing this forum: No registered users and 21 guests