450 Bushmaster stock

Talk about the AR15 style rifles chambered in 450 Bushmaster.

Moderator: MudBug

450 Bushmaster stock

Postby GaryinOh » Sun Dec 30, 2018 11:35 am

I put a 450 bushmaster upper on my lower worked like charm.When I tried adjust the stock back It would not move. I finally found the problem. The pin on adjustment lever that goes to buffer tube was bent.Got it apart and fixed. My question is what adjustable stock will hold up to the recoil of the 450? Thanks
GaryinOh
 
Posts: 1
Joined: Sun Dec 30, 2018 11:22 am

Re: 450 Bushmaster stock

Postby Hopalong » Sun Dec 30, 2018 10:24 pm

I used a Mako GL-Shock stock for a while. Nice sturdy unit, gave a good cheek rest, and reduce felt recoil a bit. By way of its construction, it's rattle free as well, one of my chief dislikes on adjustable stocks.

Hop
Hopalong
 
Posts: 137
Joined: Sat Sep 08, 2012 7:46 am
Location: Colorado

Re: 450 Bushmaster stock

Postby Bmt85 » Mon Dec 31, 2018 9:33 am

I run Magpul CTR’s on my 450B rifles. One also has a limbsaver pad on it. Never had an issue.
Bmt85
 
Posts: 622
Joined: Wed May 18, 2016 11:13 am
Location: S.E. Michigan

Re: 450 Bushmaster stock

Postby Jim in Houston » Mon Dec 31, 2018 5:12 pm

I also use the Mako GL-Shock stock. Very satisfied with it, and I've not had any problems.
Life Member, Texas State Rifle Association; Patron LIfe Member, NRA
User avatar
Jim in Houston
 
Posts: 1058
Joined: Mon Jan 17, 2011 5:55 pm
Location: Houston, TX

Re: 450 Bushmaster stock

Postby Robert FL » Mon Dec 31, 2018 9:17 pm

I have a Hogue stock, no problems. Also have another lower with a cheap adjustable with limbsaver pad..used it for a few weeks, again no problems. The Limbsaver does work well with the cheap adjustable stock but the Hogue stock has QD points where the cheapo had none.
Robert FL
 
Posts: 97
Joined: Tue Dec 19, 2017 4:33 pm


Return to AR15 Style Rifles

Who is online

Users browsing this forum: No registered users and 8 guests