Extracting problem or ejection problem

[916trdtaco]

You know at one point I was leaning toward the extractor key, I compared it with my .223/556 bolt carrier and. The .223 bolt actually hold the round in good, you hear it "click" and as for the 450B bolt carrier I have to play with the extractor just to make it fit...

[916trdtaco]

I went out and bought a heavy duty buffer spring and a heavy duty buffer...for $45
Ran both new parts In my lower with three live rounds, 1st eject fine, 2nd &3rd jammed.
I looked dry carefully into the jammed..looks like I need to replaced one of the following
the extractor or the magazine!?

[Texas Sheepdawg]

Can you see visible wear or damage on the extractor? I still think it's simply a mag issue.

[916trdtaco]

I didn't have the factory mag, so I use a 30rds mag with a 450B follower. The extractor looks fine, no demaged to it. Just recently swap out the follower and replace it with a 10rds mag and it work fine! So after trying to pin point whats wrong with my 450B turns out to be a stupid magazine. Just wanted to thanks everyone who helped and your feed.back! Thank you! Happy shooting!!

[Texas Sheepdawg]