Quick Question on Stock Inlet and 450

I know of one so far, let's see if more show up.

Moderator: MudBug

Quick Question on Stock Inlet and 450

Postby isptroop38 » Wed Dec 06, 2017 11:10 pm

Hey fellas, I am learning a lot on this forum and loving the pictures of the different builds. I was wondering why the vast majority use a DBM in their 450BM bolt gun builds. Is it a son of a gun to get the 450 to feed from a blind magazine like a Rem 700 BDL? I know the cartridge is shorter than the .308, so I can see how that may pose a problem.

I was just curious if I built a bolt gun using a Rem 700 receiver in 450 if I should just plan on using a stock with DBM or if a standard BDL will work.

Thanks in advance.
isptroop38
 
Posts: 16
Joined: Mon Dec 04, 2017 11:12 pm

Re: Quick Question on Stock Inlet and 450

Postby Al in Mi » Thu Dec 07, 2017 5:26 am

my 700 BDL has a stock 308 follower and feeds 3 FTX's from the mag with no issues. I haven't tried a XTP yet.

I've been eyeing up the Magpul DBM for 700's thou, mostly because I just like detachable mags and you can't beat center feeds imho.
User avatar
Al in Mi
 
Posts: 1982
Joined: Sat Jun 20, 2009 8:24 am


Return to Bolt Action Rifles

Who is online

Users browsing this forum: No registered users and 11 guests