300 gr Jacketed Projectiles ??

Talk about your 450b reloading experience, ask questions, etc...

Moderator: MudBug

Forum rules
Please try and keep it safe!

This information is the responsibility of the community, not the forum. 450bushmaster.net is not responsible if you blow yourselves up.

300 gr Jacketed Projectiles ??

Postby BamBam » Mon Feb 09, 2015 12:35 am

Anyone have a link to some 300 gr jacketed projectiles ?

Once I get my brass collected I thought I might try 230's and 300's

Thanks :ugeek:
Ted Nugent For President 2016


Image
User avatar
BamBam
 
Posts: 62
Joined: Sat Jan 31, 2015 12:59 am
Location: Hog Heaven

Re: 300 gr Jacketed Projectiles ??

Postby Hoot » Mon Feb 09, 2015 4:33 am

BamBam wrote:Anyone have a link to some 300 gr jacketed projectiles ?

Once I get my brass collected I thought I might try 230's and 300's

Thanks :ugeek:


http://www.midwayusa.com/product/788140/hornady-xtp-mag-bullets-45-caliber-452-diameter-300-grain-jacketed-hollow-point-magnum-box-of-50?cm_vc=ProductFinding

These and the Speer 300gr Gold Dots are a horse apiece, but it was hard finding them in stock anywhere.

Hoot
In Theory, there is no difference between theory and practice. In Practice, there is.
User avatar
Hoot
 
Posts: 5083
Joined: Tue Feb 09, 2010 9:34 am
Location: Minnesota

Re: 300 gr Jacketed Projectiles ??

Postby BamBam » Mon Feb 09, 2015 5:06 am

Perfect, thanks !

I was looking through Midway before posting but missed em.

They look like they will do nicely :ugeek:
Last edited by BamBam on Mon Feb 09, 2015 5:27 am, edited 1 time in total.
Ted Nugent For President 2016


Image
User avatar
BamBam
 
Posts: 62
Joined: Sat Jan 31, 2015 12:59 am
Location: Hog Heaven

Re: 300 gr Jacketed Projectiles ??

Postby BamBam » Mon Feb 09, 2015 5:27 am

And they are on the way ........... :D

I thought I would play with a bit more thump at a lower velocity with some 4227

Thanks Again !
Ted Nugent For President 2016


Image
User avatar
BamBam
 
Posts: 62
Joined: Sat Jan 31, 2015 12:59 am
Location: Hog Heaven

Re: 300 gr Jacketed Projectiles ??

Postby pitted bore » Mon Feb 09, 2015 10:49 pm

BamBam-

There are numerous 300-grain jacketed bullets, with a few more listed below.

To find retailers, you can use google &/or other web search engines. Usually just the maker's name and the bullet number are sufficient. Midway shows most of them, even if they are out of stock.

  • Sierra 8830 .4515" dia (splitting the difference between .451 and .451) Flat nose. Sierra says it's the toughest bullet they make

  • Speer 3974 DeepCurl Bullets 452 Dia, Bonded, Hollow Point

  • Speer 4485 Flat nose soft point bullets

  • Swift 453004 Bonded, hollow point bullets

  • Scorpion PT Gold H14030 Tipped bullet, electroplated jacket. Comes with an easily-removed sabot for ML use.

  • Hornady 67263 Another tipped bullet, with an easily-removed sabot.

If you load and use any of these, please write a post here describing how they worked for you.
Thanks.

--Bob
User avatar
pitted bore
 
Posts: 700
Joined: Sun Jun 07, 2009 8:05 pm
Location: The U.P.'s U.P.

Re: 300 gr Jacketed Projectiles ??

Postby Hoot » Tue Feb 10, 2015 5:06 am

In the case of the last bullet listed by Bob, that is the Hornady P/N for the complete sabot round, so you're paying partly for the sabot you don't need. You can buy the bullets alone in boxes of 50, like the XTP Mag bullets, for around $23.00. Here's a Link to them.

I was surprised that in practice, despite having the ballistic tip, the ones I tried did not fly any better than the 300gr XTP Mag. I thought with their longer OAL and sleeker profile that they would. There's a good video and post-mortem of them being shot into water jugs on youtube.

Hoot
In Theory, there is no difference between theory and practice. In Practice, there is.
User avatar
Hoot
 
Posts: 5083
Joined: Tue Feb 09, 2010 9:34 am
Location: Minnesota

Re: 300 gr Jacketed Projectiles ??

Postby pitted bore » Tue Feb 10, 2015 9:58 am

Hoot-

In writing my post above, i checked availability of the Hornady 300-grain SST ML bullet sold without sabots (Hornady #45207) on Midway's site, and came up with this page: Hornady Muzzleloading Bullets 50 Caliber Sabot with 45 Caliber 300 Grain SST Box of 20. I saw they were discontinued, and so I listed the bullet as #67263 with sabots, which I have sitting on my bullet shelf after being de-saboted.

Your link to the Midway page listing the #45207 shows the bullets as being available: Hornady SST-ML Muzzleloading Bullets (No Sabot) 45 Caliber (.452 Diameter) 300 Grain Box of 50 .

I suspect that Hornady did not discontinue making the bullets, but just discontinued packaging them in boxes of 20 bullets priced at $27.99, and started distributing them in boxes of 50 priced at $31.99. That's pretty good: 30 more bullets for just $4.00 more. And they are available.

(On the Midway page showing the discontinued boxes of 20, the "Product Information" is really muddled, describing swaged round balls. Apparently a rough draft page made it onto the Midway web site. Ooopsie!)

Way back in 2009 Siringo noted that the pointy SST 300-grain bullet did not fly as flat as the 300-grain XTP, despite having a better ballistic coefficient according to Hornady (.200 vs. .250) Very strange. I've got both bullets loaded for some initial trials with 300-MP when the U.P. defrosts in the spring.

Thanks.
--Bob
User avatar
pitted bore
 
Posts: 700
Joined: Sun Jun 07, 2009 8:05 pm
Location: The U.P.'s U.P.

Re: 300 gr Jacketed Projectiles ??

Postby BamBam » Tue Feb 10, 2015 12:00 pm

Thanks all for the extra info, it will give me more options to play with once I get farther into the 450b.

What kind of max velocities have been reached with the 300 XTP Mag ? Any separation issues ?

I am going to start out slower with 4227 as I have about 10lbs of it left, but will eventually play around with other powders and look for upper limits

(My MMMV and I alone am responsible for anything I do with anything I reload, etc .... ) :ugeek:
Ted Nugent For President 2016


Image
User avatar
BamBam
 
Posts: 62
Joined: Sat Jan 31, 2015 12:59 am
Location: Hog Heaven

Re: 300 gr Jacketed Projectiles ??

Postby Hoot » Tue Feb 10, 2015 5:34 pm

BamBam wrote:Thanks all for the extra info, it will give me more options to play with once I get farther into the 450b.

What kind of max velocities have been reached with the 300 XTP Mag ? Any separation issues ?

I am going to start out slower with 4227 as I have about 10lbs of it left, but will eventually play around with other powders and look for upper limits

(My MMMV and I alone am responsible for anything I do with anything I reload, etc .... ) :ugeek:


According to Quickoad. Loading the 300 XTP Mag to 2.21 inch OAL and using a maximum SAAMI recommended charge of 38.8gr, the bullet will leave a 20" muzzle at 2011 fps and blow 1 gr of unburned powder out of the barrel since as already discussed, H4227 is a little slow. With the shorter, 16" carbine barrel, that velocity drops to 1929 fps and you blow 2gr of unburned powder out of the barrel. In my work with the 300gr XTP Mag, I could only load it out to 2.21 inches OAL before it ran into the rifling. A barrel with a longer cut leade could allow you to load it out to the full 2.26 OAL, though that would only allow using so little more powder as to net you about 20 more fps.

Hoot
In Theory, there is no difference between theory and practice. In Practice, there is.
User avatar
Hoot
 
Posts: 5083
Joined: Tue Feb 09, 2010 9:34 am
Location: Minnesota

Re: 300 gr Jacketed Projectiles ??

Postby wildcatter » Tue Feb 10, 2015 6:54 pm

Hoot wrote:
BamBam wrote:Thanks all for the extra info, it will give me more options to play with once I get farther into the 450b.

What kind of max velocities have been reached with the 300 XTP Mag ? Any separation issues ?

I am going to start out slower with 4227 as I have about 10lbs of it left, but will eventually play around with other powders and look for upper limits

(My MMMV and I alone am responsible for anything I do with anything I reload, etc .... ) :ugeek:


According to Quickoad. Loading the 300 XTP Mag to 2.21 inch OAL and using a maximum SAAMI recommended charge of 38.8gr, the bullet will leave a 20" muzzle at 2011 fps and blow 1 gr of unburned powder out of the barrel since as already discussed, H4227 is a little slow. With the shorter, 16" carbine barrel, that velocity drops to 1929 fps and you blow 2gr of unburned powder out of the barrel. In my work with the 300gr XTP Mag, I could only load it out to 2.21 inches OAL before it ran into the rifling. A barrel with a longer cut leade could allow you to load it out to the full 2.26 OAL, though that would only allow using so little more powder as to net you about 20 more fps.

Hoot


Sounds like a great candidate for a "LeGendre Side Crimp". Get things AH-Cook'en before the bullet leaves the case..

..t
Safety First..t
User avatar
wildcatter
 
Posts: 2914
Joined: Sat Jun 06, 2009 8:30 pm
Location: In the Middle of Deer Central Station or better known as, in the Thumb of Beautiful Michigan

Next

Return to Reloading for the 450b

Who is online

Users browsing this forum: No registered users and 33 guests