Page 1 of 1
Primers
Posted:
Fri Sep 27, 2019 6:07 pmby Swamp Rat
My current load for my 450 is 39g H110 using WSR primers, shoots wonderful in this weather but last fall was having problems with hang fires. Was going to try CCI 450 primers since it’s the only mag primer we can get around here. How much should I reduce my load to keep from running into pressure problems? Thanks
Re: Primers
Posted:
Fri Sep 27, 2019 6:43 pmby Al in Mi
What bullet and AR or bolt gun?
Re: Primers
Posted:
Fri Sep 27, 2019 8:06 pmby Swamp Rat
240g xtp and it’s an AR pistol
Re: Primers
Posted:
Fri Sep 27, 2019 9:11 pmby Hoot
I would keep the same charge.
Hoot
Re: Primers
Posted:
Sat Sep 28, 2019 3:55 amby Al in Mi
With Hoot, charge is good, make sure you have a good crimp, might want to try seating some without using the expander die just so there is more neck tension.
Re: Primers
Posted:
Sun Sep 29, 2019 7:41 amby Swamp Rat
Thanks, will give it a shot later today.
Re: Primers
Posted:
Mon Sep 30, 2019 5:33 pmby Swamp Rat
Tried the CCI 450’s and between that and snugging the crimp a bit more everything seems to be more instantaneous upon firing. Thanks everyone