Re: 400gr cast subsonic results
Posted: Thu Jul 09, 2020 12:53 pmAre you running 223/556 follower?
I just picked up some off ebay for pmags and they seem real good.
CW
I just picked up some off ebay for pmags and they seem real good.
CW
Page 2 of 2
Posted: Thu Jul 09, 2020 12:53 pmRe: 400gr cast subsonic results
Posted: Sat Jul 11, 2020 4:43 amFound information on Savage Shooters forum that Axis 22-250 magazines work well so ordered one off of eBay. Got it in Thursday and it still will need modification as it wouldn't feed the 405 grain RNFP loads I had made up.
Re: 400gr cast subsonic results
Posted: Sat Jul 11, 2020 5:34 amI have the original 223 mag that I just leave in and use as a follower yes.
Feeding seems to be an issue with the Axis mag an big flat nosed bullets.
Feeding seems to be an issue with the Axis mag an big flat nosed bullets.
Re: 400gr cast subsonic results
Posted: Mon Jul 13, 2020 4:30 am07Kingpin wrote:I have the original 223 mag that I just leave in and use as a follower yes.
Feeding seems to be an issue with the Axis mag an big flat nosed bullets.
I've been doing the same thing. 250 gr FTX and 245 grain Interbonds feed smoothly from the magazine but nothing else does.
Re: 400gr cast subsonic results
Posted: Fri Jul 17, 2020 6:36 pmI picked up some followers off eBay. They work like a charm!!
CW
CW
Re: 400gr cast subsonic results
Posted: Thu Jul 23, 2020 4:30 amcwlongshot wrote:I picked up some followers off eBay. They work like a charm!!
CW
Good to know. I'll check eBay today, thanks!