Moderator: MudBug
SF42 wrote:You may want to go lower on powder. Sweet spot seems to be between 33.5 and 34.5. Your speed will probably drop to 2100
And 2150 with that length barrel.
Moore77 wrote:Thanks guys for the information. Diameter for this bullet is .451. When I set up a crimp die I usually use a factory load and set the for to it. However the factory bullet is .452 so my neck tension was nill. Second when I got home I found two issues. 1 being I found that two scope screws had come loose and 2 my digital scale was varying 2 to 3 tenths from my mechanic scale. I'm waiting on a shipment of bullets now. Would any of you have a idea of fps using the 275 grain bullet ? This areas I hunt limit shots to 100 yards mostly 50 - 75. Thanks for the comments . It was costly but I learned a lot.
Moore77 wrote:Thanks guys for the information. Diameter for this bullet is .451. When I set up a crimp die I usually use a factory load and set the for to it. However the factory bullet is .452 so my neck tension was nill. Second when I got home I found two issues. 1 being I found that two scope screws had come loose and 2 my digital scale was varying 2 to 3 tenths from my mechanic scale. I'm waiting on a shipment of bullets now. Would any of you have a idea of fps using the 275 grain bullet ? This areas I hunt limit shots to 100 yards mostly 50 - 75. Thanks for the comments . It was costly but I learned a lot.
Return to Reloading for the 450b
Users browsing this forum: No registered users and 129 guests