250 grain XTP 32.5 G Lil gun too low?

Talk about your 450b reloading experience, ask questions, etc...

Moderator: MudBug

Forum rules
Please try and keep it safe!

This information is the responsibility of the community, not the forum. 450bushmaster.net is not responsible if you blow yourselves up.

Re: 250 grain XTP 32.5 G Lil gun too low?

Postby plant_one » Mon Mar 14, 2022 9:03 am

Half-cocked wrote:Thank you gentlemen sounds like sage advice.

I will get some real fmj not plated when available. Zero bullets seem to be sold out. If nothing else I know I can use the Hornady xtp there fairly inexpensive and safe. I really liked the results. I am anxious to use them on whitetails.

Safety is paramount and using these plated bullets with the charge and primer I used was about as bad as it gets. Luckily I was smart enough to check the barrel after every shot however, I should have been smart and stopped immediately. Thank goodness no one was harmed.

This is one of the 2 things that really scare me when reloading the other is a under charged load with a large case. I heard that certain powders can detonate although I have not seen it. Better not temp fate even if it is theoretical.


it aint theoretical, and it doesnt even need a case as big as the 450 bm.

happened to a buddy over on the 300 blk forums - a VERY experienced reloader no less. SEE - Secondary Explosion Events are a real deal thing, and can easily destroy a firearm, and harm the peopel holding them when it does happen. simply get below 50% case fill, have the powder settle nearly flat in the case after chambering, let the primer flash over a whole bunch of powder and ignite it at once instead of burning back to front like its supposed to... and your *bang* turns into a *kaboom*.

he lucked out and thankfully only had some scratches - but it destroyed his barrel, BCG and lower. and his undershorts were a total loss too. :shock:
User avatar
plant_one
 
Posts: 1110
Joined: Sat Mar 19, 2016 8:58 pm
Location: Oakland County, MI

Re: 250 grain XTP 32.5 G Lil gun too low?

Postby Texas Sheepdawg » Tue Mar 15, 2022 12:06 pm

078177E2-BABC-4489-BFAF-014F80C1E8BB.jpeg
078177E2-BABC-4489-BFAF-014F80C1E8BB.jpeg (164.68 KiB) Viewed 1793 times
-Texas Sheepdawg

http://youtube.com/c/TexasSheepdawg21
NRA Life Member
User avatar
Texas Sheepdawg
 
Posts: 4732
Joined: Fri Nov 05, 2010 10:55 am
Location: North Texas

Previous

Return to Reloading for the 450b

Who is online

Users browsing this forum: No registered users and 92 guests