PMC primers.

Talk about your 450b reloading experience, ask questions, etc...

Moderator: MudBug

Forum rules
Please try and keep it safe!

This information is the responsibility of the community, not the forum. 450bushmaster.net is not responsible if you blow yourselves up.

PMC primers.

Postby gunnut » Sun Jun 07, 2009 9:29 pm

Has anyone tried PMC Small Rifel Primers? I did a search and found mixed results. Best I can figure is they are very similar to CCI's #41. A heavy cup primer. Anyone?
gunnut
 
Posts: 599
Joined: Sun Jun 07, 2009 3:48 pm
Location: Atlanta,Ga. Happiness is a warm Gun.

Re: PMC primers.

Postby MudBug » Sun Jun 07, 2009 9:41 pm

Sorry, I haven't tried them
Eric

"A coward is much more disposed to quarrels than a man of spirit." - Thomas Jefferson

"War is less costly than servitude. The choice is always between Verdun and Dachau." - Jean Dutourd
User avatar
MudBug
Site Admin
 
Posts: 486
Joined: Wed Jun 03, 2009 9:38 pm
Location: AZ

Re: PMC primers.

Postby BD1 » Mon Jun 08, 2009 6:59 am

No experience with PMCs here either. These days any primer you can get is a good primer to try.
BD
BD1
 
Posts: 523
Joined: Sat Jun 06, 2009 4:38 pm
Location: Northern Maine, Working on the coast, but home is still Moosehead Lake.

Re: PMC primers.

Postby Skeeter58 » Mon Nov 16, 2009 9:41 pm

The only experience I have had with PMC primers was less than satisfactory. I'm refering to small pistol primers. Out of 100 9mm shells I loaded I experienced 4 FTF. I shot them out of a model 17 Glock. The firing pin left a good indentation but no bang. I took the remaining 900 back for a refund.
Skeeter58
 
Posts: 7
Joined: Sun Nov 15, 2009 9:41 pm
Location: Northern Idaho


Return to Reloading for the 450b

Who is online

Users browsing this forum: No registered users and 16 guests