First build need help with barrel

I know of one so far, let's see if more show up.

Moderator: MudBug

First build need help with barrel

Postby Mdhart79 » Tue Aug 30, 2016 1:36 pm

Hello, I am new to this forum and the 450. Have plans on building a hunting gun for lower Michigan. I have a savage model 10 in 308 as a donor and ready to order my barrel. Planning on ordering from mcgowen just need help with length and twist. I plan on shooting factory ammo no hand loads. It seems like a lot of talk of 16" or 20" and 1:16 or 1:24. My question is has any one gone with a 18" and if so what loss is there to the 20" and I see mcgowen offers a 1:18 twist. With some saying 1:16 is to fast would 1:18 be better or should I stick with 1:24. Thanks.
Mdhart79
 
Posts: 5
Joined: Tue Aug 30, 2016 1:21 pm

Re: First build need help with barrel

Postby m113103 » Wed Aug 31, 2016 5:00 am

What bullet weight are you planning to use? Factory ammo shoots best with a 1 in 24 twist. Check out he reading on Tromix and Bartz barrels. :D :D :D :D :P
m113103
 
Posts: 148
Joined: Fri Sep 26, 2014 8:42 pm
Location: Thumb of Michigan

Re: First build need help with barrel

Postby Mdhart79 » Wed Aug 31, 2016 6:15 am

Planning on factory ammo so looks like 250gr.
Mdhart79
 
Posts: 5
Joined: Tue Aug 30, 2016 1:21 pm

Re: First build need help with barrel

Postby Al in Mi » Wed Aug 31, 2016 7:37 am

m113103 wrote:What bullet weight are you planning to use? Factory ammo shoots best with a 1 in 24 twist. Check out he reading on Tromix and Bartz barrels. :D :D :D :D :P



look up Precision Rifle here in Michigan, they post here too. they had some McGowen barrels on GB awhile back, but were longer, (24-26") but they might have something shorter on hand in stock.

My bolt gun is a 16t, 200gr Barnes the lightest I've shot in it, handled them fine.
User avatar
Al in Mi
 
Posts: 1982
Joined: Sat Jun 20, 2009 8:24 am

Re: First build need help with barrel

Postby pitted bore » Thu Sep 01, 2016 5:50 pm

Mdhart79-
Welcome to the forum, and we hope you will take the time to contribute your results and observations when you complete your rifle, particularly on problems you encounter and how you sovled them.

There's a pretty intensive discussion of your questions in a thread from a few years ago. Here's a link: BARREL LENGTH AND TWIST RATES DISCUSSION

After you read the responses there to questions like yours, please bring your additional questions back to this thread. We can try to clarify what was written there, or accept corrections to what was written there.

--Bob
User avatar
pitted bore
 
Posts: 700
Joined: Sun Jun 07, 2009 8:05 pm
Location: The U.P.'s U.P.

Re: First build need help with barrel

Postby Mdhart79 » Tue Sep 06, 2016 7:13 am

So after reading that looks like The barrel to get would be a mcgowen 20" with 1:24 twist
Mdhart79
 
Posts: 5
Joined: Tue Aug 30, 2016 1:21 pm

Re: First build need help with barrel

Postby pitted bore » Tue Sep 06, 2016 8:40 am

Mdhart79 wrote:So after reading that looks like The barrel to get would be a mcgowen 20" with 1:24 twist
That barrel should do well.

Please keep the forum informed about your progress, both positive and negative and about lessons learned from oopsies.
--Bob
User avatar
pitted bore
 
Posts: 700
Joined: Sun Jun 07, 2009 8:05 pm
Location: The U.P.'s U.P.


Return to Bolt Action Rifles

Who is online

Users browsing this forum: No registered users and 10 guests

cron