Here's some pics of my modified Kickeez recoil pad. I used the cheesy butt plate supplied by Cavalry Arms it's like a soft plastic/ hard rubber material that's on the soft side. I was too cheap to by a harder A2 butt plate so I thought I'd see if I could make this work for me. Waste no want not , I guess.
I ground down the butt plate to the interior stock dimension and then basically cut the thing in half. That left me with like a flexible skeleton that I knew wouldn't work. I drilled two holes in each side and inserted two small finishing nails to make "rebar' to hold the Acraglas epoxy. I ended up with a nice rigid piece that I epoxied and screwed into the plastic plate of the recoil pad.
The recoil pad now has lateral stability and fits tightly to the stock just like a regular butt plate.
Dan