Question about H110/296 versus Lil' Gun

Talk about your 450b reloading experience, ask questions, etc...

Moderator: MudBug

Forum rules
Please try and keep it safe!

This information is the responsibility of the community, not the forum. 450bushmaster.net is not responsible if you blow yourselves up.

Question about H110/296 versus Lil' Gun

Postby Cryptoman » Fri Apr 14, 2017 10:19 am

I'm just getting started reloading for the 450b. I've done a lot of magnum handgun cartridge reloading in the past, .357 and .44 magnum and .445 supermag. H110 was always my favorite powder, but I have no experience with Lil' Gun. I see that both H110 and Lil' Gun are considered some of the best powders for the 450b. However, I'm confused by something I see in a lot of reloading tables. Maximum loads for H110 seem to be limited by pressure, but Lil' Gun is often capable of generating the same velocity at reduced pressure. That's great, but why do the reloading tables stop at those reduced pressure loads? Why isn't Lil' Gun pushed further up the pressure curve for even higher velocities? Is it a bulkier powder, and we are running out of case volume? Thanks for your insight.
Cryptoman
 
Posts: 14
Joined: Tue Apr 11, 2017 10:43 am

Re: Question about H110/296 versus Lil' Gun

Postby Hoot » Fri Apr 14, 2017 10:48 am

Cryptoman wrote:I'm just getting started reloading for the 450b. I've done a lot of magnum handgun cartridge reloading in the past, .357 and .44 magnum and .445 supermag. H110 was always my favorite powder, but I have no experience with Lil' Gun. I see that both H110 and Lil' Gun are considered some of the best powders for the 450b. However, I'm confused by something I see in a lot of reloading tables. Maximum loads for H110 seem to be limited by pressure, but Lil' Gun is often capable of generating the same velocity at reduced pressure. That's great, but why do the reloading tables stop at those reduced pressure loads? Why isn't Lil' Gun pushed further up the pressure curve for even higher velocities? Is it a bulkier powder, and we are running out of case volume? Thanks for your insight.


Not sure if I said Welcome Aboard Cryptoman the last time, but it still stands.

Both of those powders are great in this rifle but my experience is mainly with Lil Gun. Though Hodgdon will not own up to it, many (myself included) swear that Lil Gun has changed since I first used it back in 2010. Seems a little faster, little hotter, but still IMHO, the most flexible powder for the 450b. I have used it up to 275gr bullets with good results, but in the case of the 275's that was before it changed. Now I only use it up to 250gr and even then it seems to be on the edge of its comfort zone. H110, W296 and 300MP all carry the heavier jacketed bullets up as high in weight as you'll find commercially available in .451/.452. I haven't written the Range Report from last month, but I worked through some .458 325gr FTX bullets that I resized down to .4517, using AA1680 and though I was afraid it would be too slow, it performed quite well. I suspect there was some unburned ejecta, but some of the higher charge weights threw sub-MOA 5-shot groups at 100 yds. It's supposed to be a rainy weekend, so hope to get my range reports caught up.

As far as where to start, I personally love shooting the Hornady 225gr FTX bullets over Lil Gun. Over the loading range you can observe 3 accuracy nodes before the pressure signs say stop. The lower velocity accuracy node makes for comfortable plinking. They cost about a nickel more each than 230 fmj, but they reward you with small 100 yd 5-shot groups. The 230 fmj are just too darned short for their weight.

Have fun

Hoot
In Theory, there is no difference between theory and practice. In Practice, there is.
User avatar
Hoot
 
Posts: 5083
Joined: Tue Feb 09, 2010 9:34 am
Location: Minnesota

Re: Question about H110/296 versus Lil' Gun

Postby Cryptoman » Fri Apr 14, 2017 11:24 am

Thanks for the warm welcome, Hoot. You have made some really awesome contributions to this board. I bought some Hornady 225 FTX, 240 XTP/MAG and 250 FTX bullets to start with. I also have the Hornady factory rounds to use as a reference. I'll be shooting a 16" Ruger American bolt gun, which I'm still waiting for delivery on. :( Like you, I like the idea of the 225 FTX as they are much cheaper. I have the Hornady dies for now--I'll see what kind of results I get with them before experimenting with alternative crimps. This seems like a really fun round to reload/shoot, and I'm looking forward to it!
Cryptoman
 
Posts: 14
Joined: Tue Apr 11, 2017 10:43 am

Re: Question about H110/296 versus Lil' Gun

Postby PJames » Wed Apr 26, 2017 10:06 pm

I think you will love this caliber and welcome to the Thumper world.
"One Good Shot--Is All I Need."
PJames
 
Posts: 40
Joined: Sat Dec 24, 2016 1:22 pm

Re: Question about H110/296 versus Lil' Gun

Postby Moorman » Mon Jul 03, 2017 1:05 am

This is my favorite caliber.
Moorman
 
Posts: 1
Joined: Tue Jun 27, 2017 8:33 am

Re: Question about H110/296 versus Lil' Gun

Postby RichardDixon » Sat Jun 01, 2019 4:14 pm

in some other mag pistol calibers ?
RichardDixon
 
Posts: 1
Joined: Sat Jun 01, 2019 4:12 pm

Re: Question about H110/296 versus Lil' Gun

Postby CJP1 » Sun Jun 02, 2019 5:42 pm

RichardDixon,
I don't understand your questioning about other mag pistol cartridges. I don't think the OP was calling the 450 BM a mag pistol cartridge. Please explain the reasoning for your questioning.
CJP1
CJP1
 
Posts: 211
Joined: Wed Nov 15, 2017 12:31 pm
Location: Mid Michigan

Re: Question about H110/296 versus Lil' Gun

Postby JoeHager » Sun Jun 30, 2019 6:08 am

Moorman wrote:This is my favorite caliber.


Oh really! My favorite is the same as yours. it is the best Caliber.
JoeHager
 
Posts: 1
Joined: Sun Jun 30, 2019 6:00 am

Re: Question about H110/296 versus Lil' Gun

Postby JeffreyWilliam » Wed Jul 03, 2019 9:57 am

Lil'Gun is right above both on the powder burn chart ?
JeffreyWilliam
 
Posts: 1
Joined: Wed Jul 03, 2019 9:54 am

Re: Question about H110/296 versus Lil' Gun

Postby LIL GUN LOVER » Wed Jul 10, 2019 3:30 pm

Hoot, are the reloading tables meant for the faster, slower Lil Gun or both? I have an old jug.
LIL GUN LOVER
 
Posts: 19
Joined: Wed Oct 08, 2014 11:37 am
Location: Pinson, Al.

Next

Return to Reloading for the 450b

Who is online

Users browsing this forum: No registered users and 27 guests