Hello. I am admittedly new to this, so bear with some less than intelligent questions or descriptions. I know there have been some issues with getting the 450 BM to feed reliability. I bought 3 mags off of ebay that was "supposed" to be for the 450, 458, and 50 BW. I haven't had enough range time to confirm that theory, but the limited experience I have with them makes me believe they are feeding correctly. I went through 63 rounds my first day I took the gun out and the only problem I had was with a couple of failure to ejects. Playing with the gun, I noticed the bolt does not seat well into the feed ramps and I assume that might be some of my problem. I looked at my other guns, and they will seat regardless of the travel of the BCG, but the 450 BM will only do it if I really pull the charging handle back and let it snap back. I may be barking up the wrong tree, but I wanted some of you more experienced guys and gals to chime in. I called myself greasing the BCG pretty good and focused on the bolt after what I saw it was doing. Can I polish the teeth on the bolt, or should I just hope it wears in with use? Thanks in advance.
Mike