If you had to choose 1 powder and 1 bullet, which n why?

[plant_one]

i was looking for it but failed... thats why i went to google.

thanks hoot!

[TWILITER55]

As others have mentioned 275 Barnes TSX over Lilgun. Slam dunk deal. Monolithic is the only way to go. No more grey meat from the Hornady lead grenades.

[TWILITER55]

The Barnes 200 gr FPB is also a solid choice but the TSX has a better BC. Have hair tested both with DRT results.
FPB pictured

[TWILITER55]

Barnes 275 TSX pic

[Al in Mi]

Man those Barnes are pretty

[Texas Sheepdawg]

Hornady 230 Grain FMJ Flat point with
40.5 grains of LilGun using the LeGendre
Side crimp. All day long.
Nothing mammal on the North American Continent
Could stand up to it.

[Waynzee]

I just started loading the 450 B in a RRR, so far from what I'm seeing I'm going with Reloader 7 powder and 300 gr. Speer Deep Curl bullets in Starline Brass with Fed. 250m primers. This combo gives me 1 inch groups @ 100 yards and I dug 2 bullets out of the sand bank they were shot in, both jacket and core held together, mushroomed to about an inch and one weighed 275 gr. and the other 282 grs.. Also the sectional density is 0.210 and that's what I'd prefer for a bullet like this going about 1900 fps. I'm going to try some H4198 powder and CCI 450 mag. primers with the 300 gr. Speer bullets to see if I can do some better.