Moderator: MudBug
hawcer wrote:You might have to knock it off with a brass or hard rubber mallet. Most I have removed from other AR15 barrels are not finished under the gas block.
If you are not going to use the factory take off...would you part with it? I need one for the upper I'm putting together.
Hoot wrote:I removed the useless block on my 20" and much to my surprise, it was finished underneath just fine. No sign the useless block was ever there.
Hoot
rsaun867 wrote:OK my bad, it is actualy a gas block. It just doesn't serve as the gas block block on this rifle. I removed the skrews and "wacked" it a few times pretty hard with a rubber mallet. Still won't break loose. Anyone have any Ideas? Kroil? Thanks
2zero6 wrote:rsaun867 - which one are you trying to remove? The one hidden underneath the HG or the one forward of the HG? There is 2 on the 20", one functional under the HG, and a cosmetic one forward of it. BTW the cosmetic one is actually a real low profile GB with no tube attached.
Return to Optics for the 450 Bushmaster
Users browsing this forum: No registered users and 32 guests